This article will guide you on How To Safely Flash
/ Install TWRP Recovery On Samsung Devices Using Odin. You only need
the right TWRP recovery File for your device then the process is very
simple and easy. The process is the same for all Samsung devices. So just
follow the step by step Guide to Safely Flash TWRP Recovery On Samsung Devices
Using Odin
You need to have a custom recovery (TWRP) to install Third
party ROMs, kernels and most importantly to root your device by flashing
SuperSu.So if you want to perform any of the mentioned tasks on your device,
you need to have TWRP recovery.
If you are using any Samsung android device then you
probably know about Odin flashing tool. Odin is a
Windows-based ROM flashing tool from Samsung for Samsung smartphones and tablets,
which is used to flash custom ROMs, Official OTA Updates, kernels and other
similar files manually on Samsung devices. If you soft bricked your Samsung
android phone then this thing is needed. You can unbrick your phone, unlock the
bootloader, root, unroot, update, return back to stock ROM
We are going to share full step by step guide on How
to Install TWRP Recovery On Samsung Devices Using Odin. This is going to
be the same for all Samsung devices. But you need to have the right TWRP
recovery file for your device.
A full step-by-step guide to install TWRP recovery on any
Samsung device using Odin 3.10.6
Pre-Requirements:
- Make
sure your device has more than 50% of juice
- Bootloader
must be unlocked
- Make
Sure Samsung USB drivers are installed on your PC
Downloads
⟶ Odin Flash Tool (Stable)
Now Install Odin On Your Computer (Windows 7/8/10)
How to Install TWRP Recovery on Samsung Devices Using Odin
- First
Of all, read the Pre-Requirement Section Carefully.
- Now
download the Latest Odin File from the download section above
- After
downloading, Unzip the latest Odin xxx .zip file
- Now
Run Odin3 vxxx.exe file from the extracted files on
your PC. (Download the latest odin, unzip and run)
- Make
sure you’ve downloaded The Odin flashable TWRP recovery .tar file
compatible for your device. (Important)
- (If
applicable) Enable OEM unlock: (Enable OEM unlock” feature
Only for Galaxy Note 5 and Galaxy S6 edge+ devices)
- Go
to Settings » About phone » and tap “Build number” seven
times to enable “Developer options”.
- Go
back to the main Settings page, scroll to bottom and select“Developer
options” from there.
- Under
Developer options, look for “Enable OEM unlock”checkbox/toggle
and make sure you Check it or turn it ON.
- Now
Boot your Samsung Android device into Download mode.To Do So Follow
the steps below
- Switch
off your device.
- Press
and hold “Home + Power + Volume down” buttons for a few
seconds until you see a warning screen.
- Press Volume
Up on the warning screen to accept it and boot into Download
mode.
- Once
your device is in download mode, connect it to the PC with a USB
cable. The Odin will automatically detect the device and show
an “Added!!” message.If not then your device is not
connected properly
- Now click on the AP tab on Odin window and select the TWRP recovery .tar file that you downloaded for your device.
- Click the Start button on Odin to start Flashing and wait for it to finish the process.
- Once it finished successfully, a pass message on the Odin screen will pop up
- Your device will automatically reboot when Odin is done flashing. Now You can disconnect your device.
- Done!!!
TWRP is now installed on your device
How to boot a Samsung Galaxy Device into TWRP recovery
(Same For All Samsung Devices)
- First
Switch off your device.
- Then
Press and hold “Home + Power + Volume Up” buttons
for a few seconds and as soon as you see your device’ logo on-screen,
release three buttons altogether.
- Your
device will boot into TWRP recovery
For More Detailed Guide On How To Booty Into Recovery,
follow the linked guide below
If you have any questions related to this post feel free to
ask in the comment section.
COMMENTS